Google Ads for Toronto Small Businesses: How to Set Up Your First Campaign
To set up your first Google Ads campaign for a Toronto business, create a Search campaign, pick a goal such as leads, turn off the Display Network, target the Toronto or GTA areas you actually serve, start with a tight list of keywords, add negative keywords early, and set up conversion tracking before you spend a dollar. This guide walks through each step in the order you will meet them in Google Ads, with a worked budget example for a local service business.
Google changes the Google Ads interface often, so button labels may differ from what you see. The settings and the reasoning behind them stay stable. This guide covers Search campaigns, which show text ads when someone types a query into Google. It does not cover Performance Max, Shopping, or video campaigns.
Before you build anything: three decisions
Spend ten minutes on these before you open Google Ads. Some account settings, such as currency and time zone, are difficult to change once set, so confirm them at the start and choose Canadian dollars if you are billed in CAD.
What counts as a conversion. A phone call, a quote request, a booking. Pick the one action that matters most.
Where you actually serve. Name the cities or neighbourhoods, such as Toronto, Mississauga, Brampton, or Vaughan, and be honest about how far you will travel for a job.
What a lead is worth to you. The budget worksheet later in this guide shows how to work it out.
Also make sure the Google Ads account belongs to you. If an agency builds it, it should sit under your own Google login with the agency added as a manager. ThinkProfits' guide to PPC costs in Canada lists agency-owned ad accounts among its red flags, because leaving means losing your campaign history and conversion data.
Step 1: Create the campaign and choose a goal
In Google Ads, create a new campaign and choose Search as the campaign type. As Search Engine Land's setup guide explains, Google asks you to pick a goal of sales, leads, or website traffic, then shows recommended settings for that goal. You can also continue without a goal, which skips the guided recommendations. For a Toronto service business, Leads is usually the right choice. Google then asks how people should reach you, such as website visits or phone calls.
Step 2: Turn off the extras in network settings
Search Engine Land recommends keeping Search and Display campaigns separate, because they are very different advertising environments, and notes that only rarely will an advertiser want a single campaign on both. When you see the option to include the Display Network, uncheck it. Some guides also advise unchecking Search Partners for a first campaign. We suggest starting without either, so your first results come only from Google Search, then testing the others once you have conversion data.
Step 3: Set your location targeting
This is where local businesses win or waste money. According to Search Engine Land, you can target a country, province, city, neighbourhood, postal code, or a radius around an address, and you can exclude areas where you do not want ads to appear. If your Google Business Profile is linked to your Google Ads account, you can set a radius around each of your locations.
Service businesses. List the cities you really serve, such as Toronto, Mississauga, or Vaughan, rather than all of Ontario, and exclude areas outside your travel range.
Storefronts and restaurants. Use a radius around the location and size it to how far customers realistically travel. A downtown shop and a suburban plaza will not have the same radius.
Location options. Google lets you choose whether to reach only people in your target area or also people who show interest in it. Read that setting and choose deliberately, especially if you serve a specific area.
Language. Set the languages your customers use, which may include French or others depending on your neighbourhoods.
Step 4: Pick keywords with match types in mind
Keywords tell Google which searches your ads can appear for. Google's keyword matching options page describes three match types. Broad match is the default and reaches the widest range of searches. Phrase match, written in quotation marks, reaches more searches than exact match and fewer than broad. Exact match, written in square brackets, is the narrowest.
One caution: WordStream's 2026 guide says exact match now also covers same-meaning rewrites, so it is looser than the name suggests, and that Google's own guidance increasingly pairs broad match with automated bidding. Whichever you choose, review what actually triggered your ads, which the next step covers.
For a first campaign, start with a small set of keywords that name what you sell and where, such as "emergency plumber Toronto" or "wedding photographer Mississauga" (both examples). Group closely related keywords into one ad group and write ads that repeat the language people searched.
Step 5: Add negative keywords on day one
Negative keywords stop your ads from showing for searches you do not want. Google's negative keywords page says you can use broad, phrase, or exact match negatives on Search campaigns, that negatives do not match close variants, and that you must add singular, plural, and synonym forms yourself. For example, excluding "flowers" blocks "red flowers" but not "red flower".
Here are starter ideas to review, not a rule list, because the right negatives depend on your business: jobs, careers, salary, free, diy, course, training, template. A plumber might block "diy" while a hardware store sells to people doing it themselves, so add only words that would never lead to a customer.
Then use the search terms report. Google describes it as a list of searches that triggered your ads, with a match type column showing how closely each search matched your keyword. You can add negatives straight from the report, and by default negatives added this way are added as exact match, according to Google's guidance. Check it a few days after launch, then weekly.
Step 6: Choose your bidding and budget
Bidding settings control how Google spends your daily budget. Strategies that automatically target conversions need conversion data to learn from, so a brand-new account with no history gives them little to work with. One practitioner guide suggests a daily budget of roughly 10 times your target cost per conversion, held for four to six weeks of testing. That is a heuristic, not a Google rule, and it can be too high for a small local budget. Use the worksheet below to set a budget you can afford to hold for that long.
A budget worksheet for a local service business
The numbers below are illustrative, not Toronto benchmarks. Swap in your own.
Find your gross profit per customer. An average job of $1,200 at a 40 percent margin leaves $480.
Apply your close rate. If one in four enquiries becomes a customer, each enquiry is worth about $120 in gross profit ($480 times 0.25).
Set a ceiling for cost per lead. At $120 you only break even on gross profit, so aim well below it. A target of $70 leaves room to earn something.
Work out the monthly budget. Ten leads a month at $70 each is $700 in ad spend, before any agency fee.
Check feasibility. Use the forecasts in Google's Keyword Planner to see typical costs per click for your keywords and area. If clicks cost $8 and about one click in ten becomes a lead, a lead costs about $80, so the target above is too tight and you need a better offer, a better page, or a smaller service area.
If the maths does not work, fix the offer, the landing page, or the service area before raising the budget. More spend rarely rescues a weak page.
Step 7: Write ads and add assets
Write several headlines and descriptions so Google can test combinations. Include the service, the city, and a clear next step. Add a call asset if phone calls matter and your team can answer during the hours the ads run. Send each ad to a page that repeats the promise in the ad. Sending every click to a home page wastes the effort you put into targeting.
Step 8: Set up conversion tracking before launch
Conversion tracking tells Google when someone completes a valuable action after clicking, such as a form submission, a phone call, or a purchase. Without it you cannot tell what is working, and automated bidding has nothing to learn from. Turn on auto-tagging too, which removes the need to add UTM parameters to each ad by hand. Test the tracking yourself before launch: submit your own form and confirm the conversion appears.
Your first 30 days
Day 1. Launch, and confirm conversions are recording.
Days 3 to 5. Open the search terms report and add negatives.
Week 2. Pause keywords that keep spending without leads, and check that your ads and landing page match what people searched.
Week 3. Compare lead quality, not only lead count. Ask which calls and forms became customers.
Week 4. Decide what to change: budget, bidding, locations, or the landing page. Change one thing at a time so you can see what worked.
Common first-campaign mistakes
Targeting all of Ontario. It spreads the budget over people you cannot serve.
No conversion tracking. You end up judging results by clicks.
Sending traffic to the home page. Visitors have to hunt for the thing they searched.
Ignoring the search terms report. Irrelevant searches keep burning budget.
Judging results after three days. Early numbers are noisy, so give the campaign time before changing everything.
Common questions
How much should I budget for Google Ads in Toronto?
ThinkProfits reports that meaningful ad spend for small and mid-sized Canadian businesses commonly runs $1,000 to $10,000 a month, with competitive trades in major metros often needing $3,000 to $7,000. That is one agency's view. Your number depends on your cost per click and what a lead is worth, so use the worksheet above.
Should I hire an agency or run it myself?
A small account for a single service can be run in-house if someone reviews it every week. Consider an agency when the budget grows or when nobody has the time. Our guide to digital marketing agency pricing in Toronto shows how to compare quotes.
How long before Google Ads start working?
Ads can show as soon as they are approved, but expect weeks of adjustment. The practitioner heuristic above holds a budget steady for four to six weeks of testing before judging results.
Do Google Ads improve my map pack ranking?
No. Google's Business Profile help says local ranking cannot be paid for, so ads are a separate placement and do not move your organic or map pack position. To rank there, work on your profile, reviews, and website. Our local SEO guide for Toronto businesses covers the basics.
Next steps
If you would like help building or auditing a campaign, see our Google Ads management and paid media pages, or book a free 15-minute consultation. If you want to fix your profile first, our Google Business Profile checklist is a good place to start.
For the organic side of local visibility, read how to rank in Google's local map pack in Toronto.
Sources and dates: Search Engine Land, how to set up a paid search campaign; Google Ads Help pages on keyword matching options, negative keywords, and the search terms report; WordStream, Google Ads match types; and ThinkProfits, PPC management cost in Canada, published August 6, 2026. Google Ads screens change often, so check labels against your account. The budget example is illustrative and ours.



Comments